Hello, We just occur to have actually a an excellent video top top the transmissions business being done and also it shows how to check the liquid level from the dipstick check out he video clip it reflects it clear at 130. Also check the diagrams listed below to show you now. Https://youtu.be/D7bgOjIRMMwCheck the end the diagrams (Below). You re welcome let us know if you require anything else to obtain the difficulty fixed.


You are watching: 2003 saturn vue transmission fluid check

*

*



See more: How To Say Beauty In Japanese (To Women & Men), How Do You Say “You Are Beautiful” In Japanese

below is just how you business the infection fluid. 1. Raise and support the vehicle. 2. Ar a drainpipe pan under the transmission. 3. Remove the reduced tube assembly drain plug. 4. Remove the lower tube assembly indigenous the transmission. Permit the liquid to fully drain. Notice: describe Fastener notice in Cautions and Notices. 5. Install the reduced tube assembly into the transmission. Tighten Tighten the assembly to 20 N.M (15 lb ft).6. Temporarily install the original reduced tube plug. Carry out not tighten. 7. Lower the vehicle. Important: do not use ATF P/N 21005966 or P/N 21019223. This fluids space not compatible with this transmission. 8. To fill the transmission to the proper level v Saturn DEX-CVT(R) liquid P/N 22688912. 9. Install a scan tool.10. V the automobile on a flat and level surface, begin the vehicle.11. Circulate the fluid through the transmission making use of the following procedure: 11.1. V the brake applied, shift the transmission from the PARK (P) to reverse (R) because that 10 seconds. 11.2. Shift the infection to drive (D) for 10 seconds. 11.3. Shift the transmission to PARK (P), enabling the engine to continue to be running.12. Raise and also support the vehicle. 13. Remove the reduced tube assembly drainpipe plug and also discard.14. Carry out the adhering to procedure to assure appropriate fluid level: - If the liquid drains under at a secure stream from the opening, permit the liquid to drainpipe until the stops. - If no fluid or a very small amount of fluid drains, include fluid to the transmission until a secure stream starts to drain. Stop adding fluid immediately. Enable the liquid to drainpipe until that stops, 15. Install a brand-new lower tube assembly plug and also clean any kind of excess fluid from the transmission. Tighten Tighten the plug to 11 N.M (97 lb in).16. Lower the vehicle. Important: do not remove the reduced tube assembly drain plug.17. V the scan tool, document the TRANS fluid TEMP. - If the TRANS liquid TEMP is 20 C (68 F) or less, include 0.47 liter (0.5 qt) of liquid to the transmission. - If the TRANS liquid TEMP is 40 C (104 F), include 0.71 liter (0.75 qt) of liquid to the transmission. - If the TRANS fluid TEMP is 60 C (140 F), add 0.95 liter (1.0 qt) of fluid to the transmission. - If the TRANS fluid TEMP is 80 C (176 F), include 1.2 liter (1.25 qt) of liquid to the transmission.18. Rotate OFF the ignition.19. Add Saturn DEX-CVT additive P/N 22697447 to the transmission using the detailed applicator. Inject the entire components into the transmission.See the diagrams below for plug place