We effort to provide convenience to our client with totally free keyless entry remote fob programming instructions for every single vehicle the we sell on NorthCoast Keyless.

You are watching: 2004 gmc envoy key fob programming

Many world don’t recognize that they deserve to purchase their own replacement auto entry remote, save up to 70% turn off of significant up Dealership prices, and program the replacement remote to their automobile themselves. We understand how good it feel to save money and also do something yourself; and we target to do it as painless as possible for you!


Time needed: 5 minutes.

*
KEY FOB REMOTEStep-By-Step how To Programming Instructions

Close all Doors

CLOSE all doors.

Enter Programming setting – step 1

INSERT vital into the Ignition (DO not TURN).

Enter Programming setting – action 2

PRESS and also HOLD the power UNLOCK switch on the Driver’s side door. Perform NOT release till instructed.

Enter Programming mode – step 3

TURN the Ignition ON, OFF, ON, off (ON is the position simply shy of cranking the engine and OFF is whereby you have the right to remove your key).

Enter Programming setting – action 4

RELEASE the power UNLOCK button on the Driver’s side door. Upon relax of the UNLOCK button, the auto should respond through cycling the door locks LOCK / UNLOCK signaling effective entry into Programming Mode.a. IF the door locks cycle, continue to action 6. If the door locks cycle prior to releasing the UNLOCK button, the car has NOT gone into Programming Mode and also you should RETURN to action 1.b. IF the door locks proceed to cycle prior to releasing the UNLOCK button, over there is a difficulty with the vehicle’s keyless entrance system and the remotes need to be programmed through a certified professional Automotive Locksmith or Dealer.c. IF you are unable to acquire the door locks come cycle at all, friend are turning the key too fast or also slow, over there is a problem with her vehicle’s keyless entry system, or the auto is no equipped through keyless entry. Examine with a certified experienced Automotive Locksmith or Dealer.

Program Remote

HOLD the LOCK and UNLOCK buttons ~ above the far at the exact same time, approximately 30 seconds, until door locks cycle LOCK / UNLOCK come signal successful programming the the remote.

Program additional Remotes

REPEAT action 6 for any added remotes to it is in programmed, consisting of working ones.

Exit Programming Mode

TURN ignition to ON to exit Programming Mode.

Finalize Programming

TURN Ignition to OFF and also remove crucial to finalize programming.

Test Remotes

TEST every remotes. Programming is complete.

Share

If this programming instructions aided save girlfriend time and money, please think about sharing our website with friends and also family for this reason they can do the same.

See more: Insert Two Arithmetic Means Between 3 And 24 Are, What Are Two Arithmetic Means Between 3 And 24


Programming Notes:

Verify the adhering to prior to following these instructions:Your automobile is equipped v keyless entry, andYou have actually a crucial fob remote the is compatible through your vehicle.Obtain every remote transmitters because that this vehicle. This procedure will certainly erase all formerly programmed remotes. You must program every existing and new remotes the you wish to usage on the car at this time.You might clear your keyless entry mechanism memory by beginning programming setting as displayed in the steps above.