You are watching: 2013 ford focus timing belt or chain
One of the points I like around my procession is that it has a time chain, no a belt that requirements to be changed every 80,000 miles, etc. V me putting around 30K miles every year, I"d be transforming the belt quite often.So, what walk the emphasis have and also if a belt, as soon as does it must be changed??? Thanks
NW Posse#10 Team Duratec#69F2 Header, Steath Exhaust, CAI, AR103, Tuned by Randy Fswerks, DGR Coil OversDOMINANT front and also rear LCA dominant endlinks huge toe and camber arms
Duratecs have a chain. One of the reasons I reduce the diesel VW native consideration. All that an innovation and quiet a belt? Not precisely the exact same (actually longer chains) yet my F-150 has 185,000 mile on that SOHC chains and also runs perfectly. You"re ~ above the right thought track.
The timing chain go not have actually an interval, it"s draft to critical the life that the car. Although that is possible it could need regular adjustment if it starts to do noise, etc.
See more: “ I Cannot Live With You Dickinson, “I Cannot Live With You” By Emily Dickinson
You replace the chain once you rebuild the engine, or if the lasts much longer than 200k miles. It"s the exact same as other chains- favor some Nissans, because that example. Ns disagree the belts are lower tech 보다 chains. Chains to be first, although shorter on push-rod engines. Chains have a problem with twisting the end of form at high speed, which is why you have tensioners on chain setups. This is because of weight and centrifugal forces. Belts don"t have as much weight, much much less friction, call for no oiling, but don"t have as for sure of a "grab" together a chain v a sprocket. Those have actually tensioners and also guides also to protect against hopping. A belt have the right to be made to critical as long as a chain- ask any type of BMW owner- their belts are nearly 1 1/2" wide and critical 200k + miles. The difficulty is just that- in order for a belt to be made to last as long as a chain, the takes up 5x the space of the chain. Making use of a chain allows Ford and Nissan to take it up the excess space a belt would usage with an ext space for broader cylinders. This engines are substantial anyway. IDK If any of you are old sufficient to realize it, however a freaking 2.0 GDI engine is not much smaller 보다 an old 302 in physics size. It"s certain lighter, but these engines space large- go inspect out the old pushrod 4 cyls that room out there- those room tiny in comparison.
Be eclectic. ---The complete How-To Archive--Moderating everything now, allow me understand if I have the right to help.