Brake lights are among the most vital safety attributes that your Honda Accord has. They let other vehicle drivers know as soon as you room slowing down, and that they must slow down too. If your brake lights aren’t working, you’re way more likely to get rear finished than normal. The great news is the troubleshooting brake lights that aren’t working isn’t as well difficult. The most common cause for this is a bad brake light switch.

You are watching: Brake lights stuck on honda accord

You deserve to test even if it is or not your Accord’s brake lights are working all by yourself. Just earlier up yes, really close to the garage door and also push the pedal. Girlfriend should be able to see the brake lamp illuminating the door. If also one of them come on, you know that the brake light fuse isn’t blown. We’ll go into much more depth on that below.

Driving there is no the brake lights functioning is simply as unsafe together if her Accord’s brake lights were stuck on.

1. Inspect the Fuse

If no one of the brake lights are working, we space going to follow the circuit native the fuse box back to the brake pedal. In ~ some suggest the power is not gaining from suggest A to allude B. Us just have to find where that is.

Please keep in mind that tail lights have the right to work also if the brake lamp are melted out. It is entirely feasible that every the brake lights shed out at the exact same time.


The first thing the you have to do if all of the brake lights are not working is examine the fuse. It’ll be plainly labeled. The usually states something follow me the currently of “stop lamps” or stop. You have the right to pull it and visually examine it to make sure that it is no broken.

Even if the looks fine, if girlfriend have an additional fuse the the exact same amperage, swap it anyway. What works far better is making use of a an easy electrical check light to identify if the circuit works. Wal-Mart and also any parts store will store them in stock, generally at $10 or less.

Just hook the clip that the light as much as a great ground and touch the two steel tabs on top of the fuse. Over there is no have to pull the fuse because that this. It should be “hot” on both sides. If that is not, change the fuse. If the blows an ext than once, it’s most likely that her Accord’s wiring harness has been damaged top top the way to the brake lights. Make sure to put the same size fuse earlier in

2. Examine your Accord’s Brake irradiate Switch

Ok, currently we’ve shown that over there is power going come the brake irradiate circuit, it’s time to figure out wherein in the course from the fuse box to the brake lamp the strength is lost. The most common location is thebrake irradiate switch. The an excellent news is they are inexpensive and also easy to replace.

Your Accord’s brake irradiate switch is under the brake pedal. It constantly should have actually power running to it, also if the an essential is off. We need certainly need a test light in ~ this point. The video clip below shows precisely how to perform this.

He has the brake light switch out of the vehicle, which provides it means easier to see. You perform not should do this.

Basically, there space two wires, one is alway hot. Once you press the brake pedal down, it sends out this strength to the brake lights. This is the most likely failure point.

If your auto has cruise control, that may appear as despite there are two brake switches. The other one is come tell the cruise regulate to turn off as soon as you press the brake pedal. You might need to consult your hands-on to determine which one is which. But, together a basic rule, the cruise regulate switch will not have actually power going to it when the vital is off like the brake light switch does.

3. Examine for a poor Ground

If over there is a floor wire running to the brake light switch, make sure that that is secured tightly and also corrosion free. If friend can’t find the ground cable at all, run a jumper wire to substitute for the soil wire.

Now test the brake light switch. If the works, resolve the soil wire.

4. Other Wiring Issues

If your Accord’s brake light switch watched ok, and also there are no brake lights illuminating in ~ all, examine the wiring exploit going indigenous the brake move to the bulbs themselves. There could be an issue with frayed wiring, wiring that has lost its ground, or a short/open situation.

If you have actually the “third” or specialized brake light (the one no in your tail lights), check the harnessafter they diverge. You understand that it has power before this allude since the third brake light is still obtaining power.

See more: How To Use Windows Movie Maker Slow Down Video, How To Speed Up Or Slow Down The Speed Of A Video

Look in the stems (if applicable). Check any kind of grounds the harness has actually in there. Make sure that the harness wasn’t damaged in there. It’s not unusual for cargo to perform this.

Conclusion: Honda Accord Brake Lights not Coming On

If her Accord’s brake lights are not working, it’s most most likely going come be caused by a poor brake light switch. Great luck addressing your vehicle!