Your cylinder most likely needs a new application of grease to work-related properly. Use this cylinder maintenance guide for instructions.

You are watching: Hon lateral file cabinet drawer removal

For more assistance please situate the serial number ~ above the sticker situated on the underside of the seat and contact your purchasing dealer.


Often, this difficulty is because of a faulty control mechanism or pneumatic cylinder, and can be quickly replaced on most snucongo.org chair models. Please situate the serial number ~ above the sticker situated on the underside of the seat and contact her purchasing dealer.


Often, this trouble is as result of a faulty control mechanism or pneumatic cylinder, and also can be easily replaced on many snucongo.org chair models. Please find the serial number ~ above the sticker located on the underside that the seat and contact your purchasing dealer.


A wobble in a chair can be caused by a faulty control mechanism or chair base. To resolve the wobble it is vital to verify i m sorry of this is causing the wobble.• control Mechanism: v the base of the chair collection on the floor, pivot the chair from side to side by alternately putting push on the right, climate left next of the seat. If the seat “wobbles” whereby the pneumatic cylinder and also control mechanism join, the manage mechanism is faulty and also may have to be replaced.• Please situate the serial number on the sticker situated on the underside of the seat and also contact the original purchasing dealer.


The washer and also the spring clip that hold the cylinder in place have actually fallen off. Please find the serial number top top the sticker situated on the underside that the seat and also contact your purchasing dealer.


The base and also cylinder will most likely need to it is in replaced. Please find the serial number top top the sticker located on the underside the the seat and contact your purchasing dealer.


First check to make certain grease or oil has actually not been transferred from the user’s shoes or pant foot to the floor. The user may have rubbed their feet throughout the grease used to the cylinder and transferred the to another surface. This worry could be brought about by one of the following:• The seal top top the cylinder has actually broken.• The chair"s hubliner has come loosened causing the cylinder to come to be misaligned.• If the chair is new, there has actually been too much grease used to the hubliner in the base.• To solve this issue with her chair, please locate the serial number on the sticker situated on the underside of the seat and also contact her purchasing dealer.


*

The concealed “European” hinges top top snucongo.org doors allow easy three-way adjustment of door alignment.• to raise or reduced the door, situate the recessed Phillips screw the furthest to the rear of the hinge. Turn this screw to change the elevation of the door. You do not should loosen the center locking screw to do this adjustment.• To readjust the side-to-side gap between the doors, adjust the Phillips screw closest come the door on the surface of the hinge body. You carry out not need to loosen the center locking screw to do this adjustment.• To readjust the in-out key of the doors faces, very closely loosen the facility locking screw and also slide come the exactly position. CAUTION: do not move this screw external the adjustment seat selection or the door may dislodge and also fall. Tighten the facility locking screw once the correct adjustment has been made.


my overhead unit was attached come the desk with double-sided difficult tape. Exactly how do I relocate or eliminate the overhead unit without damaging the laminate surface?

The tape used to host the unit in place is industrial strength. Do not use pressure to eliminate the unit, as the laminate surface ar will be torn loosened before the ice releases.To remove the tape:1. Use mineral spirits follow me the bottom edge where the tape is stop the finish panel to the desk surface. Permit this come seep under the edge and begin come dissolve the tape’s adhesive.2. Take one finish of a strong, thin item of wire (piano wire works best) in every hand.3. Slowly work the wire in between the bottom that the end panel and also the workdesk surface.4. Use firm press to tenderness slide the wire between the end panel and also work surface. Take care in this procedure not to damages the end panel or laminate surface.5. As soon as the wire has separated the end panel and work surface, the remaining tape and also adhesive can be removed with mineral spirits. Use the mineral soul to a cloth and wipe the ice cream residue away through firm pressure.6. Clean both surfaces v a clean, damp fabric to remove any kind of remaining mineral spirits.7. Additional dual stick tape have the right to be ordered for reattachment. Please check out your local snucongo.org Dealer for assistance.


i have plenty of snucongo.org desks and also files in mine office and also would choose them to use the exact same key. Can this be done?

Yes, since January 1997 all of our Laminate workdesks come standard through a core removable lock system. You deserve to order keyed alike replacement lock cores from your snucongo.org dealer. If her snucongo.org filing cabinet was made before January 1997, contact customer support to identify if your cabinet can be retrofitted through a replaceable lock.Refer to the complying with if you have a variety of snucongo.org furniture in your office girlfriend would favor keyed alike:• Laminate Casegoods (1997-present): F23B Lock Kit (Black confront Lock)• Lateral papers (1997-present): F23C Lock Kit• Vertical files (1997-present): F24 Lock Kit• Steel workdesks (1997-present): F23C Lock Kit (Chrome face Lock)• Veneer Casegoods (1997-present): F23B Lock Kit (Black face Lock)• If you are unsure about what you must order, please locate the serial number on the sticker ~ above the exterior right side that the upper most drawer, and contact her purchasing dealer..


You can buy a replacement crucial on ours snucongo.org webstore www.snucongo.orgaccessories.com or girlfriend can call our customer support team for aid in bespeak a instead of key.


If you need a key, you might purchase one on our snucongo.org webstore, www.snucongo.orgaccessories.com or you can contact our customer assistance team for aid in notified a instead of key.

See more: When Is The Next Michael Vey Book Coming Out, Michael Vey Series In Order By Richard Paul Evans


For a box drawer:1. Fully extend package drawer.2. Depress the black color tab located in the center of the on slide channel.3. Proceed to traction the drawer out.For a document Drawer:1. Open the document drawer slightly.2. Depress the black tab situated on the slide behind the drawer front.3. While pressing in on the tabs, lift up on the front of the drawer.4. As soon as the front of the drawer has separated from the slide, continue to traction the drawer out along the slide.5. If girlfriend have any kind of questions at any kind of point, please find the serial number ~ above the sticker on one of two people the outside, knee space side of the height drawer or the underside of the top and contact her purchasing dealer.


You can use the following file to discover where the hardware pack is situated for her product. Hardware pack Locator.