You are watching: How to repair roll top desk
In bespeak to accessibility the wood workdesk cover, you"ll require to very first take the ago panel turn off of the desk. It should be organized on with small nails. Once the back is off, friend should be able to pull the roll top right the end of the track.
After acquisition it the end of the desk, ns realized that a roll peak is built of wood slats attached to a towel backing. The cloth on mine was old and had worn enough to allow the slats to traction apart. All that you"ll have to fix the desk is some hefty duty fabric and glue (I supplied wood glue, yet I"m certain craft adhesive would work as well).
Cut the cloth to be about four inches much less than the width of your role top and just slightly much less than the length.
The roll optimal on my desk was only damaged into two sections, so i did not tear the old towel off and also re-position everything. If yours is broken in countless pieces, though, it may be way to take it each section apart and glue it earlier onto the new fabric piece by piece. Be sure to apply enough glue that all the cloth is fastened securely ~ above the wood.
Since i was painting my desk, I likewise wanted to paint this ar on both sides. Painting a rolltop is a lot easier if that is done prior to putting it earlier in the desk. If you space interested in paint over the fabric to do it "disappear," it help to thin the paint out a tiny with part water. Allow the repaint to dry and then insert the roll top back into the track.
Once the ar is earlier in the desk, reattach the back panel through nails and also your desk is fixed! Isn"t the a basic fix?
See more: How To Enchant Weapons In Oblivion :Enchanting, Tips On Enchanting Weapons