The following are tips for removing graffiti indigenous various varieties of surfaces. The City of Stevens point does not endorse specific brands of products, yet rather provides brand names to aid the consumer identify these graffiti removal materials and also supplies.

You are watching: What should you not do if you want to get rid of graffiti

Before you gain started, remember:

Prompt removal is many effectiveAlways usage the many gentle way of removal first in order come not harm surfaces.Use caution as soon as using dangerous and also toxic chemicals.Test your removal methods and materials ~ above a small, unimportant area come be certain they occupational without causing damage.Hire a trained expert for an important surfaces, historic buildings, or turbulent materials.

Metal Surfaces:

Try clean everything graffiti with any common repaint thinner (i.e. Mineral spirits, lacquer thinner, acetone), or try graffiti removal products such together Goof Off. Occasionally wiping the graffiti v light penetrating oil such as WD-40 or Three-in-One will eliminate it.If graffiti remains, shot to eliminate it by rubbing v steel or bronze structure or light sandpaper.If graffiti quiet remains, shot power-washing it v a push washer.If no one of these approaches work, paint over the graffiti.

Wood Surfaces:

If the lumber is no weathered and is sealed v paint, stain, or sealer, try to eliminate it by clean everything it through mineral spirits. If the timber is weathered, perform not use this technique, as the mineral spirits will certainly be absorbed by the hardwood - steering the paint further down right into it.Power washing v low pressure can be used, however, watch closely to make certain the press is not driving the repaint deeper right into the timber grain. The is not recommended come exceed 700 psi.If these methods do no work, sand the wood and re-paint or just paint end the graffiti.

Plastic Surfaces:

Try clean everything graffiti v a light penetrating oil such as WD-40 or Three-in-One. Perform not use paint thinners as they can soften the plastic and also can cause clouding (if clear plastic) or irreversible tackiness of the surface.Sometimes a irradiate rubbing through ultra-fine stole or bronze wool will remove the paint.If these approaches do not remove the graffiti, repaint over it.

Glass Surfaces:

The best method for removed painted graffiti indigenous glass is to usage a razor blade to very closely scrape the off. This an approach is 99% effective. Usage the razor tongue in a holder and also scrape at a 30-degree edge to the glass.If the repaint does not come totally off after utilizing the razor blade, usage ultra-fine bronze wool with water to gently obstacle the remaining repaint off.You can use paint thinners on glass, however, the razor blade technique is much much faster and more environmentally friendly.

Masonry Surfaces:

The best option for this type of surface is to power-wash the graffiti v low pressure. The is not recommended come exceed 700 psi. Be careful in choosing the kind of guideline you use in the pressure wand. As well narrow of a reminder (such as 0 degree) will etch the stonework surface leave a perfect overview of the graffiti removed.Sand-blasting is another removal option. Similar to pressure washing, be mindful not to allow the sandblasting pointer to continue to be in one spot too long as it deserve to permanently etch the surface. Keep the tip relocating over the painted area and also the bordering area so as to blend in the surface.If power-washing or sand-blasting go not remove the graffiti, the next best option is to paint over the graffiti.

See more: 30+ What Cannot Talk But Will Always Reply When Spoken To ?

Get more information around removing graffiti native brick and also masonry (PDF)

Always read product labels and also follow all manufacturer instructions and recommendations. Many of the commodities identified over are flammable - use caution and also follow safety directions when using these products. Constantly use proper safety clothing and equipment consisting of gloves, safety and security glasses, etc. The is recommended the a tiny test area be done prior to a full application of any kind of product.