Set the SSID that the accessibility point. This setting is available only top top PS3™ solution that are equipped with the wireless LAN feature.
Scan because that a nearby accessibility point.Select this setting when you execute not know the SSID of the access point. The system will detect nearby accessibility points and display details on the SSID and security settings.
Specify the access point by start its SSID manually using a keyboard.Select this setting when you know the SSID.
Use the automatic setup feature of the accessibility point.This setting is easily accessible only in areas where PS3™ solution that assistance this attribute are sold. Choose this setup when making use of an access point the supports automatic setup. Follow the on-screen instructions.
WLAN protection Setting
Set an encryption crucial for an access point. This setup is available only top top PS3™ solution that are equipped with the wireless LAN feature.
Do not collection an encryption key.
Set an encryption key.The encryption key can be gone into on the following screen. The encryption key is displayed as a series of asterisks.
WPA-PSK / WPA2-PSK
These settings are easily accessible only top top PS3™ systems marketed in Korea and are accessible only ~ above PS3™ systems that are equipped with the wireless LAN feature.
Do not set authentication information.
Set authentication info when using public WLAN services.Enter her user ID and also password on the next screen. For details, refer to the info supplied by the public WLAN business provider.
Ethernet procedure Mode
Set the Ethernet data transport rate and also operation method. Usually select .
Automatically collection basic settings.
Manually readjust the Ethernet data transport rate and also operation method.
IP resolve Setting
Set the technique for obtaining one IP address when connecting come the Internet.
Use the IP address allocated by the DHCP server.You can enter the DHCP server organize name ~ above the next screen.
Set the IP address manually.You can go into values for the IP address, subnet mask, default router and primary and an additional DNS ~ above the next screen.
Connect to the net using PPPoE.You can get in your user ID and also password top top the following screen.
Set the DHCP organize name. Usually pick .
Do not Set
Do not set the DHCP host name.
Set the DHCP hold name.
Set the DNS server.
Automatically obtain the DNS server address.
Manually enter the DNS server address.
Configure the MTU value used when transmitting data. Usually pick .
Automatically collection the MTU value.
Specify the maximum size of data packets (in bytes) that deserve to be sent in one transmission.
Set the proxy server to be used.
Do no Use
Do not use a proxy server.
Use a proxy server.You can enter the proxy server attend to and port number on the following screen.
Set to allow or disable UPnP (Universal Plug and Play).